XTORSION® Green

Low/Mid Launch and Low Spin
MSRP
$350.00USD

The ALDILA® XTORSION® Green features our classic stiff-tip low launch profile as well as a new and unique woven graphite material on the outer layer of the shaft at the tip-section.  This Multi-Axial Material Bias Angle (MAMBA®) Technology places a high-tech material on the shaft in a +/- 45 degree fiber orientation. This unique use of a flat weave material on the exterior of the shaft provides significantly improved torsional stability to this counter weighted shaft in the lower half (tip-section) where the greatest percentage of twisting occurs during the swing and at impact.

  • Specifications

    ITEM DESCRIPTION

    FLEX

    LENGTH(in)

    WEIGHT(g)

    TIP O.D.(in)

    TIP LENGTH(in)

    BUTT O.D.(in)

    TORQUE(degrees)

    KICK PT.

    TIP TYPE

    XTORSION™ Green 50

    R

    46.0

    56

    0.335

    3.0

    0.604

    4.3

    MID/HIGH

    PARALLEL

    XTORSION™ Green 60

    S

    46.0

    66

    0.335

    3.0

    0.602

    3.6

    MID/HIGH

    PARALLEL

    XTORSION™ Green 60

    TX

    46.0

    68

    0.335

    3.0

    0.605

    3.1

    MID/HIGH

    PARALLEL

    XTORSION™ Green 70

    S

    46.0

    74

    0.335

    3.0

    0.606

    3.1

    MID/HIGH

    PARALLEL

    XTORSION™ Green 70

    TX

    46.0

    75

    0.335

    3.0

    0.616

    2.9

    MID/HIGH

    PARALLEL

    XTORSION™ Green 80

    TX

    46.0

    88

    0.335

    3.0

    0.610

    2.4

    MID/HIGH

    PARALLEL

  • Technology

    Multi-Axial Material Bias Angle (MAMBA®) Technology

    Multi-Axial Material Bias Angle (MAMBA®) Technology places a high-tech, flat weave material on the shaft’s lower half exterior, where the most twisting occurs during the swing and at impact. MAMBA® Technology improves torsional stability and spin control where it’s needed the most.

  • Fitting

    Driver Speed (mph)/Driver Carry (yds)

    80/210

    81-90/210-239

    92-105/240-259

    106+/260+

    XTORSION® Green 50

    R

    XTORSION® Green 60

    S

    TX

    XTORSION® Green 70

    S

    TX

    XTORSION® Green 80

    TX

  • Tip Trimming Information

    Trim Code

    Procedure

    A

    Trim to length from butt end.

    B

    Tip Trim in 1/2" increments (3-PW).

    C

    Tip Trim in 1/2" increments (3W-7W).

    D

    Tip Trim Driver 2", 3W 2-1/2", 4W 3", 5W-7W 3-1/2".

    E

    Tip Trim 2", then 1/2" increments (3-PW).

    F

    No Tip Trim for Driver. Trim to length from butt end. Tip Trim Fairway Woods 1", then to length from butt end. For hosel designs with bore thru depths greater than 2", we recommend blind boring the shaft in the hosel 1-3/4".

  • Media