NV® 2KXV Green
Low Launch and Low Spin
MSRP
$299.95USD
When the original NV®, featuring Micro Laminate Technology®, was introduced it quickly became the number one after-market golf shaft ever offered, a favorite of professionals and amateurs alike. After years of development, ALDILA® has created NexGen Micro Laminate Technology™ – new, even thinner high-performance carbon fibers combined with today’s advanced fiber resin technology. The result is even more layers of carbon fiber offering maximum consistency and performance. What separated the original NV® from the other shafts available was what some referred to as its ‘perfect feel’. The 2KNV provides for even better feel and performance.
Available in the NV® 2KXV Green design for those seeking a lower ball flight, the NV® 2KXV Blue design for those seeking a mid-ball flight, and the NV® 2KXV Orange design for those seeking a higher ball flight.
-
Specifications
ITEM DESCRIPTION
FLEX
LENGTH(in)
WEIGHT(g)
TIP O.D.(in)
TIP LENGTH(in)
BUTT O.D.(in)
TORQUE(degrees)
KICK PT.
TIP TYPE
NV® 2KXV® Green 65
A
46.0
64
0.335
3.0
0.645
5.2
MID/HIGH
PARALLEL
NV® 2KXV® Green 65
R
46.0
64
0.335
3.0
0.645
4.9
MID/HIGH
PARALLEL
NV® 2KXV® Green 65
S
46.0
65
0.335
3.0
0.645
4.5
MID/HIGH
PARALLEL
NV® 2KXV® Green 65
X
46.0
66
0.335
3.0
0.645
3.9
MID/HIGH
PARALLEL
NV® 2KXV® Green 75
R
46.0
71
0.335
3.0
0.640
4.5
MID/HIGH
PARALLEL
NV® 2KXV® Green 75
S
46.0
72
0.335
3.0
0.640
4.0
MID/HIGH
PARALLEL
NV® 2KXV® Green 75
X
46.0
74
0.335
3.0
0.645
3.5
MID/HIGH
PARALLEL
-
Technology
NexGen Micro Laminate Technology® (MLT)
ALDILA®’s NexGen Micro Laminate Technology® (MLT) utilizes ultra-thin layers of premium aerospace-grade materials. Shafts with MLT use up to twice as many prepreg plies as alternative shafts, producing a stable, solid laminate void of “dead zones”. This design revolution eliminates inconsistent shots caused by shaft variability, while enhancing feel.
-
Fitting
Driver Speed (mph)/Driver Carry (yds)
80/210
81-90/210-239
92-105/240-259
106+/260+
NV® 2KXV Green 65
A
R
S
X
NV® 2KXV Green 75
R
S
X
-
Tip Trimming Information
Trim Code
Procedure
A
Trim to length from butt end.
B
Tip Trim in 1/2" increments (3-PW).
C
Tip Trim in 1/2" increments (3W-7W).
D
Tip Trim Driver 2", 3W 2-1/2", 4W 3", 5W-7W 3-1/2".
E
Tip Trim 2", then 1/2" increments (3-PW).
F
No Tip Trim for Driver. Trim to length from butt end. Tip Trim Fairway Woods 1", then to length from butt end. For hosel designs with bore thru depths greater than 2", we recommend blind boring the shaft in the hosel 1-3/4".
-
Media
