Woods

Woods Featuring Impact Stabilization

ASCENT™ Wood Series

  • ASCENT Wood - Red ASCENT™ Red helps you raise your launch angle while controlling spin and face deflection for higher ball flight with long descent and roll out. Golfers looking to improve flight apex often turn to added loft or a more active shaft, yet both can lead to more spin and bigger misses. ASCENT models counter this with an integrated Impact Stabilization Zone. This unique enhancement – created by pairing a strategically-placed section of increased stiffness with a focused area of heavier, tungsten-infused prepreg – preserves the shaft’s lively feel and higher launch angle while maintaining stability and maximum energy transfer at impact. You get a more active profile, more kick, and higher ball speed while still getting the accurate, penetrating flight needed for maximize distance. For additional information on the ASCENT™ family of shafts, Impact Stabilization, and FlyDrive, click here.
  • ASCENT™ Ultralight Wood Click here for your chance to win an ASCENT or ASCENT Ultralight Shaft. ASCENT™ Ultralight models deliver an easy, high launch angle without the typical compromises of an ultra-lightweight shaft. Featuring Focused Mass Technology (FMT™), a precise weighting section that utilizes heavier, tungsten-infused prepreg in the butt end to help players turn through the ball better for stronger, straighter/drawn ball flight. ASCENT™ Ultralight models also feature FlyDrive™ Technology – a new application inspired by a similar innovation in high-performance fly fishing rods. A unique, full-length Visco-Elastic Isolation Layer (VEIL) is added to improve overall strength and feel while bolstering the shaft’s resistance to “ovaling,” a common deficiency in thinner-walled designs. FlyDrive™ adds very little weight or thickness so ASCENT™ Ultralight shafts remain quick and fast with a satisfying, solid feel at impact. For additional information on the ASCENT™ family of shafts, Focused Mass Technology, and FlyDrive, click here.
Woods Unparalleled Stability

SYNERGY® Series

  • SYNERGY® Blue ALDILA® SYNERGY® Blue shaft delivers unparalleled stability in a smooth, balance profile through the synergy of Graphitic Carbon Fiber and nanoscopic Graphene platelets. In its purest state, Graphene is up to 300 times stronger than structural steel, and one of the thinnest and lightest materials known to man. These properties are what make it an ideal component of the Graphene Infused Resin used strengthen the tip section of SYNERGY Blue shafts. With an exceptional feel and a smooth, controlled release, these shafts offer premium performance at a surprisingly attractive price. Designed with a high-end Ion Plating Technology finish for a vibrant look that matches their thoroughly modern design.
Woods

Defying Convention

ROGUE® Black Series

  • ROGUE® Black 130 M.S.I. Click here for your chance to win an ASCENT or ASCENT Ultralight Shaft. The ALDILA® ROGUE® offers unmatched performance and consistency through the use of advanced, extremely high modulus, Graphitic Carbon Fibers that provide performance characteristics never before available in a golf shaft. Building off the success of the ROGUE® BLACK 110 M.S.I. Limited Edition which featured 110 M.S.I. Graphitic Carbon Fiber, we have taken ROGUE® performance to another level by incorporating even stronger 130 M.S.I. Graphitic Carbon Fiber. The ROGUE® Black 130 M.S.I. is a mid-high launch, mid spin shaft with a reinforced tip-section fortified with 130 M.S.I. Graphitic Carbon Fiber and a higher-balance point.

ROGUE® Silver Series

  • 2nd Gen. ROGUE® Silver 110 M.S.I The 2nd Generation ROGUE® Silver 110 M.S.I. Series uses advanced aerospace material, in a unique design, to provide golfers with the superior performance and consistency that the ROGUE® family of shafts has built its reputation on. A stiff tip profile generates the Mid/Low Launch, Mid/Low Spin launch characteristics that the ROGUE® Silver 110 M.S.I. shafts are renowned for. Combining matte and gloss finished give the 2nd Generation ROGUE® Silver 110 M.S.I. a premium look to match its performance.

ROGUE® ∞

  • ROGUE® ∞ THE RETURN OF ROGUE®. ALDILA’s iconic ROGUE family returns with ROGUE® ∞. The most successful shaft family in the rich history of ALDILA, ROGUE boasts more than 70 worldwide professional wins. ROGUE® ∞ cements the family as ALDILA’s cornerstone product of the past and present and an exciting part of its future. The new ROGUE® ∞ is an extremely counterbalanced shaft but also its best feeling, attributable to ALDILA’s all-new innovative Dual Torque Core. The torque core is the most important part of the shaft in determining how the shaft feels as it is directly responsible for the transmission of vibrations from impact into the golfer’s hands. By incorporating 80-Ton Pitch Fiber full-length in the torque core and 46-Ton Pitch Fiber in the shaft’s angle plies, ALDILA created a dual layered core – the Dual Torque Core – to drive down torque while creating an extremely counterbalanced shaft that still feels smooth and active in the handle. This improvement in the torque core, coupled with the strong counterbalance creates tighter dispersion, better consistency swing-to-swing and increased club head speed to help make the golfer faster, consistently. ROGUE® ∞ was designed with an innovative cosmetic incorporating matte black paint fading into a super-premium ion plated tip section.
Woods

Over Fifteen Years of Dominance

NV™ '23

  • NV<sup style="font-size:36%">™</sup> Series GREEN - Low Launch, Low Spin  PINK - Mid Launch, Mid Spin Since debuting in early 2003, ALDILA’s NV™ Green and NV™ Pink Wood shafts have grown into some of the most trusted golf shafts in the industry. Golfers everywhere have enjoyed the ability to play a high-performing aftermarket shaft without having to break the bank. At long last, ALDILA NV™ Green and Pink shafts have been cosmetically refreshed – but not to worry – the structure and technology platform remains the same. Through the use of high-strength carbon fiber in its construction, golfers can still expect the reliable, stable, low-launch low-spin performance that NV™ Green and Pink have provided for two decades. The new NV™ Green features the same constant taper design to a smooth and stable feel shot after shot. The next generation NV™ also incorporates ALDILA®’s NexGen Micro Laminate Technology® (MLT) - which uses more than 20 layers of ultrathin, aerospace-grade prepreg, that eliminate unwanted gaps and “dead zones” that can occur during the manufacturing process. MLT enhances feel and reduces inconsistent shots cause by shaft variability. Who it’s best for? ALDILA NV™ Green and Pink Wood shafts are best for golfers looking for an upgraded aftermarket shaft that doesn’t break the bank.
  • NVS Series ORANGE/PINK - High Launch, Mid/High Spin Since debuting in early 2003, ALDILA’s NVS Orange and NVS Pink Wood shafts have grown into some of the most trusted golf shafts in the industry. Golfers everywhere have enjoyed the ability to play a high-performing aftermarket shaft without having to break the bank. At long last, ALDILA NVS Orange and Pink shafts, the high-launching and high-spinning counterparts to its siblings NV Green and Pink, have been cosmetically refreshed. The high strength fibers used in the structure and technology platform ensures golfers receive the same feel and stability that NVS Orange and Pink have provided for two decades. The new Orange features the same constant taper design to a smooth and stable feel shot after shot. The next generation also incorporates ALDILA®’s NexGen Micro Laminate Technology® (MLT) - which uses more than 20 layers of ultrathin, aerospace-grade prepreg, that eliminate unwanted gaps and “dead zones” that can occur during the manufacturing process. MLT enhances feel and reduces inconsistent shots cause by shaft variability. Who it’s best for? ALDILA NVS Orange and Pink Wood shafts are best for golfers looking for an upgraded, higher-launching, higher-spinning aftermarket shaft that doesn’t break the bank.

NV™ (NXT)

  • NVS Orange (NVS Pink) (NXT) NOW AVAILABLE at an Authorized ALDILA® Dealer near you. The ALDILA® NVS Orange is one of the most popular after-market shafts ever. The NVS Orange features ALDILA® ‘s NexGen Micro Laminate Technology® (MLT) - which uses up to twice as ultra-thin layers of premium grade carbon fiber material, to eliminate unwanted gaps and “dead zones” that can occur during the manufacturing process. MLT enhances feel and eliminate inconsistent shots cause by shaft variability. Similar to NV™ Green, we’ve updated the NVS Orange cosmetic to compliment today’s modern golf club designs and added some new weights/flexes to help fit more player types. The NVS Orange was born to perform and continues to withstand the test of time.
  • NV™ Green (NV™ Pink) (NXT) NOW AVAILABLE @ an Authorized ALDILA® Dealer near you. Debuting in early 2003, The ALDILA® NV™  Green is one of the most popular after-market shafts ever. With that kind of success, why change what works. The new NV™  Green features the same constant taper design to a smooth and stable feel shot after shot. The next generation NV™  also incorporates ALDILA®’s NexGen Micro Laminate Technology® (MLT) - which uses more than 20 layers of ultrathin, aerospace-grade prepreg, that eliminate unwanted gaps and “dead zones” that can occur during the manufacturing process. MLT enhances feel and eliminates inconsistent shots cause by shaft variability. We’ve updated the NV™  Green’s cosmetic to appeal to today’s more global audience as well as developed lighter option and additional flexes to help fit more player worldwide. The NV™  Green was born to perform and continues to withstand the test of time.
Woods

Ultra Lightweight Redefined

QUARANTA® Series

  • QUARANTA® Sapphire The ALDILA® QUARANTA® Sapphire is a high-performance, ultra lightweight sub-50 gram golf shaft. It has a smooth bend profile provides a responsive tip and mid-section, balanced by a more stable butt-section. The QUARANTA® Sapphire is lighter weight and has a lower torque than the QUARANTA® Blue Series, and features premium ion plating and is strengthened with high-modulus MR70 carbon fiber that helps it launch lower, with a flatter ball flight. The ALDILA® QUARANTA® Sapphire features a premium Ion Plated (IP) finish and high-modulus MR70 carbon fiber for added strength and stability.
  • QUARANTA™ Gold ALDILA® QUARANTA® Gold brings the “ultra” to ultra lightweight premium performance. The first ALDILA® series to offer a sub-40g option, these high performance shafts remain remarkably stable even as low and lively as a 35 R2 flex. The QUARANTA® Series is now lighter and stronger than ever, yet QUARANTA® Gold maintains the smooth profile and optimal flex desired by better players choosing to play an ultra lightweight shaft. High-modulus MR70 carbon fiber is added to the tip section to provide additional strength and contribute to a design that is lighter, tighter and more responsive. Raising the ultra lightweight bar once again.